Grundig GCA-C2357V, Owner'S Manual

Page: 12 / 23

MODE [OFF, D-WDR, BLC, HSBLC] :
- OFF: Deactivated.
- D-WDR: This function provides intelligent
light level control to overcome even strong
backlight conditions.
- BLC: BLC is used to counterbalance the screen image by increasing the brightness so
that a subject which appears dark due to a strong backlight can be displayed in more
detail.
- HSBLC (Highlight Suppression Back Light Compensation): This function is used to
surpress or mask a strong light source (for example, headlights of cars during night-
time) so that other subjects can be seen in more detail.
LEVEL:
Depending on which option you have chosen under MODE, you can set different levels
here. For BLC Mode, you can choose a compensation level from LOW, MIDDLE or
HIGH. For HSBLC mode, you can set the sensitivity trigger level between 0 and 100. For
D-WDR mode, you can set the WDR level between 0 and 15.
AREA:
When choosing BLC under MODE, you can enter the AREA sub-menu by pressing the
SET UP stick. The following sub-menu will then appear.
Here you can set the area of the BLC.
> H. START (0~14): Here you can set the
starting position of the area from the left.
> V. START (0~14): Here you can set the
starting position of the area from the top.
> WIDTH (0~15): Here you can set the
horizontal size of the area.
> HEIGHT (0~15): Here you can set the
vertical size of the area.
When choosing HSBLC under MODE, you can enter the AREA sub-menu by pressing
the SET UP stick. The following sub-menu will then appear.
10 English