Grundig GCA-C2357V, Owner'S Manual

Page: 11 / 23

- COLOR: The picture will be always displayed in colour.
- BW: The picture will be always displayed in black & white. In BW mode, you can turn
the BURST signal ON or OFF.
- EXTERNAL: Day and Night can be distinguished by the external output.
DWELL TIME [0SEC~60SEC] :
You can select here the duration of the change from day to night mode and night to day
mode.
D → N LEVEL [0~255] :
Adjust the DAY → NIGHT switch level from 0~255 by moving the SET UP stick to the left
or right direction.
N → D LEVEL [0~255] :
Adjust the NIGHT → DAY switch level from 0~255 by moving the SET UP stick to the left
or right direction.
BURST:
In BW mode, you can turn the BURST signal ON or OFF.
SMART IR:
This option controls the IR LED (bright portion base), saturation is not expected.
When selecting
↵
, the following submenu will appear.
- MODE [ON, OFF] :
Activate the SMART IR function by
selecting ON.
- GAIN [1~100] :
The gain can be adjusted from 1 to 100.
- H. START (0~14): Here you can set the starting position of the area from the side.
- V. START (0~14): Here you can set the starting position of the area from the top.
- WIDTH (0~15): Here you can set the horizontal size of the area.
- HEIGHT (0~15): Here you can set the vertical size of the area.
NOTE:
When the SMART IR setting is ON, the functions D-WDR, HSBLC, and BLC cannot be
used in B/W mode, but only in colour mode.
6.5. BACKLIGHT
This function is used for backlight and highlight compensation.
9 English