Grundig GCA-B0002B, Owner'S Manual

Page: 14 / 21

6.7. MOTION DET (Motion Detection)
MOTION DET [ON, OFF] :
This function is used to detect moving objects in the monitored area. There are 4
predefined boxes representing the areas that can be monitored for motion.
When choosing ON, the following submenu will appear where you can adjust the
settings for the MOTION DET function.
DETECT SENSE [000~127] :
Sets the motion detection sensitivity.
BLOCK DISP [OFF, ON, ENABLE] :
Controls the ON/OFF status of the motion
detection block display.
- ON, OFF: Turns the block display on/off.
- ENABLE: If the BLOCK DISPLAY is set to ON, you can choose in this setting with the
OK key areas where the motion detection (in block format) should not be displayed.
Using this option is only possible when MONITOR AREA is set to ON. To exit this
setting, press the OK key and hold it for a while.
MONITOR AREA [OFF, ON] :
If you choose ON, the areas for motion detection monitoring will be shown on the screen.
AREA SEL [1/4 ~ 4/4] :
Select a monitoring area out of the 4 monitoring areas and set the options below for the
selected monitoring area.
- TOP: Sets the top side of the selected monitoring area.
- BOTTOM: Sets the bottom side of the selected monitoring area.
- LEFT: Sets the left side of the selected monitoring area.
- RIGHT: Sets the right side of the selected monitoring area.
12 English