Grundig GCA-B0002B, Owner'S Manual

Page: 18 / 21

Steps for programming the Camera ID:
1. Turn on the CAMERA ID mode and enter the submenu.
2. Using the four direction keys, switch between the characters. Press the OK key to
make a desired figure.
3. Press CLR if you need to delete letters.
NOTE: CHR1 is the preset selection of characters for this camera (letters from A to Z,
numerals from 0 to 9, symbols). The camera ID is always created with letters and
numbers out of CHR1. The option CHR2 has no function in this camera model.
6.12. SYNC
This camera model is set to fixed INT (Internal Syncronisation).
6.13. LANGUAGE
The camera supports 8 different languages. Select your preferred language from the list.
6.14. CAMERA RESET
All settings will be restored to factory default.
6.15. NEXT / BACK
When you select NEXT, the second main menu page will be shown. When you select
BACK, the first main menu page will be shown.
6.16. EXIT
Exits the menu without saving any changes in the settings.
6.17. SAVE ALL
Saves the changes in the settings.
16 English