11
ENGLISH
INSTALLATION
-------------------------------------------------------------------------------------------------------------------
ConnectaUSBdongle
1
Insert the USB dongle in the socket »
USB1
«
or »
USB2(HDD)
« of the television.
Registertheremotecontrol
1
Press and hold »
AVSYNC
« on the remote
control.
– The blue display on the dongle flashes.
2
While keeping the »
AV SYNC
« on the re-
mote control pressed down, press and hold
USB dongle lock button for 3 seconds.
Notes:
7
If the remote control display is red, registra-
tion is not successful, please repeat the pro-
cess.
7
After successful registration the line
»VR Remote Status« is displayed in the
»SETTINGS« menu.
7
The registration can be checked by selecting
the main menu with »
MENU
«, selecting the
menu option »SETTINGS« with »
V
« or »
Λ
«
and confirming with »
OK
«. Then select the
line »VR Remote Status« with »
V
« or »
Λ
«.
AllLEDstatusanddescription
LEDstatus
Description
RED LED flash
(fast).
(It will continuous until
user push any button of
remote)
Remote control Locator.
BLUE LED flash (fast)
(just once).
Key buttons transmission.
RED LED flash every 1
second for 5 times, stop
for 10 seconds and
repeat.
Battery low.
RED LED on continuous.
Battery charging.
BLUE LED on continuous
(until unplug the cable)
Battery charging full.
BLUE LED flash fast
while sync and continu-
ous on until sync com-
plete. Time out 5 sec
and led off
SYNC
Remotecontrollocator
This feature allows you to locate the remote cont-
rol if you have lost it.
1
Press the button on the USB dongle.
– Remote control will emit a sound after a
short while.
2
Press any key on the remote control after you
have found it to stop the buzzer.
