background image

DISHWASHER / USER INSTRUCTIONS

39 / 41 EN

Troubleshooting

Detergent remains in detergent dispenser.

•  Detergent dispenser was damp when adding detergent. >>> Make sure that the 

detergent dispenser is dried well prior to filling it with detergent.

•  Detergent is added long before the washing process. >>> Pay attention to add detergent 

shortly before start-up of the washing.

•  Opening of the detergent dispenser lid is prevented during washing. >>> Place the dishes 

in a way that will not prevent the detergent dispenser lid from opening and the water 
going into the machine from impellers.

•  Detergent is stored under unsuitable conditions. >>> If you are using powder detergent, 

do not store the detergent package in humid places. Keep it in a closed container if 
possible. For ease-of-storing, we recommend you to use tablet detergents.

•  Impeller holes are clogged. >>> Lower and upper impeller holes might be clogged with 

food remnants such as lemon pips. Clean the impellers regularly as illustrated in section 
“Cleaning and Care”.

Decorations and ornaments on kitchen utensils are being erased.

C

Decorated glasses and decorated lustre porcelains are not suitable for washing in 
the dishwasher. Manufacturers of some glassware and porcelain tableware items 
do not recommend washing such kitchen utensils in the dishwashers either.

Dishes are scratched.

C

Kitchen utensils that contains or are made of aluminum should not be washed in 
dishwasher.

•  Salt leakage exists. >>> Pay attention not to spill salt around the salt filling hole while 

adding salt. Spilled salt can cause scratches. Make sure that the salt reservoir lid is tightly 
closed after finishing the filling process. Run the prewash programme to remove the salt 
that spilled inside the machine. Since the salt granules that will remain under the lid will 
dissolve during prewash, causing the lid loosen, check the lid once again at the end of 
the programme.

•  Water hardness setting is low or salt level is insufficient >>> Measure the hardness of the 

supply water appropriately and check the water hardness setting.

•  Dishes are not placed orderly in the machine. >>> When placing the glasses and other 

glassware into the basket lean them not against other dishes but the edges or racks of 
the basket or the glass support tines. Striking of the glasses to each other or to other 
dishes due to the impact of water during washing can cause breaks, or scratches on their 
surfaces.

Summary of Contents for Edition 70











































Reviews: