background image

36

DISHWASHER / USER INSTRUCTIONS

/41 EN

7

TROUBLESHOOTING

Machine does not start.

•  Power cable is unplugged. >>> Check if the power cable is plugged in.
•  Fuse is blown. >>> Check the fuses in your house.
•  Water is cut. >>> Make sure that the water inlet tap is open.
•  Door of the machine is open. >>> Make sure that you have closed the door of the 

machine.

•  On / Off button is not pressed. >>> Make sure that you have turned on the machine by 

pressing the On / Off button.

Dishes are not washed clean

•  Dishes are not placed orderly in the machine. >>> Load the dishes as described in the 

user manual.

•  Selected programme is unsuitable. >>> Select a programme with a higher temperature 

and cycle time.

•  Impellers are stuck. >>> Prior to starting the programme, turn the lower and upper 

impellers by hand to make sure that they rotate freely.

•  Impeller holes are clogged. >>> Lower and upper impeller holes might be clogged with 

food remnants such as lemon pips. Clean the impellers regularly as illustrated in section 
“Cleaning and Care”.

•  Filters are clogged. >>> Check if the filter system is clean. Clean the filter system regularly 

as illustrated in section “Cleaning and Care”.

•  Filters are installed incorrectly. >>> Check the filter system and make sure that it is 

installed correctly.

•  Baskets are overloaded.  >>> Do not overload the baskets in excess of their capacity.
•  Detergent is stored under unsuitable conditions. >>> If you are using powder detergent, 

do not store the detergent package in humid places. Keep it in a closed container if 
possible. For ease-of-storing, we recommend you to use tablet detergents.

•  Detergent is not sufficient. >>> If you are using powder detergent, adjust the amount of 

detergent according to the soiling degree of your dishes and/or programme definitions. 
We recommend you to use tablet detergents for optimum results.

•  Rinse aid is not sufficient.  >>> Check the rinse aid indicator and add rinse aid if 

necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the 
machine.

•  Detergent dispenser lid is left open. >>> Make sure that the detergent dispenser lid is 

closed tightly after adding detergent.

Dishes are not dry at the end of cycle

•  Dishes are not placed orderly in the machine. >>> Place your dishes in a way that no 

water will accumulate in them.

Summary of Contents for Edition 70











































Reviews: