Grundig DKR 700 DAB+, Manual

Page: 19 / 27

19­ ­ ENGLISH
Tuning­and­storing­radio­stations­
(DAB­and­FM)­–­first­installation
When the device is connected to the mains for
the first time or after factory reset, the Auto Tun-
ing System will start to scan the whole DAB band-
width and store in the program list.
The device will then scan the FM waveband and
store the first 10 radio stations as presets 1 to 10.
The time is updated automatically.
1 Press » ON/OFF « to switch on the device.
– Display: »
WELCOME
« and then »
SCAN
«.
– The automatic station search starts, searches
and stores the radio stations.
– After the automatic scan, the device switches
to standby, the current time lights up.
Tuning­and­storing­DAB­radio­
stations­–­after­a­removal
You can activate the Auto Tuning System again.
That is reasonable, if you will use the device in
another place or search new DAB radio stations.
1 Press » ON/OFF « to switch on the device.
– Display: the name of the radio station, e.g.
» B5 AKT «.
2
Start the automatic station search by pressing
and holding down » MODE­SCAN ALARM «.
– Display: »
SCAN
«.
– The automatic station search starts, searches
and stores the radio stations in the program
list.
Note:­
7
You can also activate the automatic scan for
DAB and FM radio stations from the menu.
Open the menu with » MENU «.
Select the option » SYSTEM « with » +­VOL.­- «
and confirm by pressing » SELECT/INFO «.
Select the option » ATS « with » +­VOL.­- « and
press » SELECT/INFO « to confirm (display:
» N «).
Select » Y « with » +­ VOL.­ - « and start the
automatic station search by pressing
» SELECT/INFO «.
SETTINGS
­---------------------------------------------------------------------------------------------------------------------------------------
Storing­DAB­radio­stations­to­
presets
After the automatic station search, all radio sta-
tions will be stored in the program list. You can
store your favored radio stations on presets 1 to
10.
1 Open the menu with » MENU «.
2
Select the option »
STATION
« with »
+­VOL.­-
«
and press »
SELECT/INFO
« to confirm.
3 Select DAB radio stations with » +­VOL.­- « and
press » SELECT/INFO « to confirm
4 For storing the DAB radio station on a preset,
press and hold down the required preset but-
ton » 1 « to » 5 «, until » STORED « appears.
Note:­
7
Press »
+5
« for a short time and then the re-
quired preset buttons »
1
« to »
5
« change for
presets 6 to 10.
Programming­DAB­radio­stations­
–­manually
1
Open the menu with »
MENU
«.
2 Select the option »
MANUAL
« with » +­VOL.­- «
and press » SELECT/INFO « to confirm.
– Display: e.g. »
I74.9 SA
« (frequency and
channel of a DAB radio station).
3 Select the desired frequency/channel with
» +­VOL. « or » VOL.­- «.
4
Press »
SELECT/INFO
« to confirm the frequen-
cy/channel.
– Display: the signal strength, the DAB radio
stations will be stored in the program list.
5 Press » MENU « to end the setting.