Grundig DKR 700 DAB+, Manual

Page: 18 / 27

ENGLISH 18­ ­
Connecting­to­the­mains­supply
Note:
7
Check that the mains voltage on the type
plate (on the bottom of the device) corre-
sponds to your local mains supply. If this is
not the case, contact your specialist dealer.
1 Plug the power cable into the socket (230 V~,
50/60 Hz).
Caution:
7
The device is connected to the mains with the
power cable. Pull out the power cable when
you want to disconnect the device from the
mains.
7
Make sure the power plug is easily acces-
sible during operation and not hindered by
other objects.
POWER­SUPPLY/INSTALLATION
­-------------------------------------------------
Setting­up­the­device
The speaker of the device is located at the bottom
of the device. To optimise the sound, mount the
device holder on the bottom of the device.
1 Click the device holder in place in the recesses
on the bottom of the device.
VOL.
Mounting­ the­ device­ under­ the­
cabinet
The fixing screws can be found in the side com-
partment of the packing.
1
Mark the locations for four mounting screws.
2 Screw the device holder under the cabinet with
four screws.
VOL.
3 Insert the device in the holder.
Note:­
7
To remove the device, press the snap-catch
at the back and remove by pulling forwards.