Grundig Digta CordEx, Operating Manual

Page: 28 / 34

2
Troubleshooting
Electrical devices can experience malfunctions. This must not always concern a fault on the device. Thus, based on the following table,
check if you can eliminate the malfunction yourself.
Malfunction Possible cause Repair
Device does not switch on. Battery empty. Charge or replace the battery. (See the
section “Charging battery” and “Chang-
ing battery”.)
Power supply interrupted. Check the power cable to ensure that it
is properly inserted and is not damaged.
(See the section “Connecting docking
station”.)
Device does not respond to
input commands.
Wireless connection to docking
station interrupted.
Check wireless connection. Symbol for
wireless connection must continuously illu-
minate.
Switch device off and on again.
No sound audible, or too low. Microphone or playback vol-
ume incorrectly set.
Set volume in dictation software.
Sound distorted or too loud. Microphone or playback vol-
ume incorrectly set.
Set volume in dictation software.
Troubleshooting