Grundig Digta CordEx, Operating Manual

Page: 26 / 34

2
Check firmware version in dictation microphone (see section
“Settings in system menu”).
If a new firmware version for Digta CordEx is available online,
download the corresponding file onto the PC.
Keep paging button [5] on docking station [2] pressed down for
several seconds.
Now the Digta CordEx registers itself for data transfer at the
PC and is assigned with a separate drive letter.
Copy the new firmware file “CordEx.hex” to the Digta CordEx
drive.
The dictation microphone shows the progress of the update in
display [17].
After successful transfer, the dictation microphone is rebooted.
Installation of firmware update is now complete and dictation
microphone is ready.
Settings in system menu
The dictation microphone features a system menu for internal
settings.
►
►
►
►
Accessing system menu
Briefly press On/Off button [8] on dictation microphone [1] until
the text Menu appears at bottom left of display text.
Press blue button Menu [10].
The system menu consists of the following menu items:
Connection
Start pairing
Stop pairing
Connects the dictation microphone to a docking station or discon-
nects an existing connection. This function is required for multiple
device operation (see section “Operating several dictation micro-
phone/docking stations”).
Version/Info
Serial no.
FW/Urloader
Display of serial number and firmware version. This function is
required for firmware update (see section “Installing firmware
update”).
►
►
■
■
Extended operation