12
CONNECTION AND PREPARATION
----
Connecting the headphones
1
Insert the headphone plug (3.5 mm) into the »
U
« socket on the
device.
– The loudspeaker of the device is switched off.
Important:
Excessive volume levels when using headphones or earphones
can damage your hearing.
Note:
You can also use the »
U
« socket to connect the device to a hi-fi
system.
Inserting batteries in the remote control
1
Pull off the film from the battery.
2
Take off the battery compartment cover (screw cap).
3
When inserting the battery (3 V, lithium, CR 2025), make sure
the positive terminal (+) is facing upwards and the buttons on the
remote control are facing downwards.
4
Replace the battery compartment cover (screw cap) and fasten
it.
Notes:
Do not expose the battery to extreme heat, caused for example
by direct sunlight, heaters or fire.
If the device no longer reacts properly to remote control
commands, the battery may be flat. Always remove used
batteries. The manufacturer accepts no liability for damage
caused by leaking batteries.
Environmental note:
Batteries, including those which contain no heavy metal, should
not be disposed of with household waste. Always dispose of used
batteries in accordance with local environmental regulations.
•
• LOCK
•
OPEN
