28
Switching between two-channel and
multi-channel mode
The DVD receiver has a Dolby Pro Logic II Decoder, which changes
the stereo signal into a Dolby surround signal during disc playback,
thus providing a high quality surround sound effect.
Pro Logic II has two playback modes, namely music and movie. In
music mode, there is a shelf filter, which acts gently on high fre-
quencies on the surround channels. It provides a natural, convincing
sound effect, because surround sound information is normally sub-
ject to slight treble attenuation due to reflection and absorption.
Movie mode, on the other hand, does not use a surround filter, but
stereo surround outputs instead.
The loudspeaker configuration (two-channel or multi-channel)
appears in the loudspeaker display on the DVD receiver.
1
To switch between two-channel and multi-channel mode, press
»
K
« on the remote control repeatedly.
– Display during switching: briefly »
PLII OFF
«, »
PLII
MUSIC
« or »
PL II MOVIE
«.
– Display on the DVD receiver in Dolby Pro Logic II mode:
»
ij
ProLogic II
«.
Adjusting the brightness of the DVD receiver
display
You can change the brightness of the display in three levels.
1
To activate the function, press »
O
« on the remote control.
– Display: »
DIMMER MAX
«, »
DIMMER MID
« or »
DIMMER
MIN
«.
2
To set the brightness level, press »
a
« or »
s
« repeatedly and
press »
OK
« to confirm.
– Display: briefly »
OK
«.
– The brightness is set.
General information on disc playback
If the symbol »
-
« appears on the television screen and
»
INVALID
« appears on the DVD receiver display after certain key
commands, the disc manufacturer has restricted the functions, or the
function is not available in the current operating mode.
GENERAL FUNCTIONS
________________________
PLII MOVIE
DIMMER MAX
INVALID
OK
ij
ProLogic II
