GRUNDIG Service
Allixx SCD 5410 DAB
1 - 12
ENGLISH
13
To make the use of the device as simple as poss-
ible, a number of custom settings which are only
required once or very occasionally are located
on a special operating level (EXPERT).
Changing EXPERT settings
1
Keep pressing »
SOUND
« until »EXPERT«
appears in the display.
2
Use the
volume knob
to select the
required EXPERT setting, e.g. volume limit
on switching on. Display: »ON Volume: 3«.
3
To activate it, briefly press the
SOUND
button.
– Display: »the selected programme, display-
ed inversely«. It is played at the volume dis-
played.
4
Use the »
<
« or »
>
« soft keys or the
volume
knob
to select the required volume.
5
Briefly press
SOUND
to conclude the setting.
CD MODE WITH CD CHANGER
13
Selecting the CD changer input
source
This function is only possible if a CD changer is
connected.
1
Keep pressing the
SOURCE
button until you
see »
MCD
« in the display, followed by the CD
you have just selected.
Selecting a CD directly
6 CD changer:
1
Select the CD with the memory buttons 1...5
or with »
I
I
I
«.
10 CD changer:
1
Select the first 5 CDs with the memory
buttons 1...5.
2
The »
I
I
I
« button switches to the second level.
3
Select the next 5 CDs (CDs 6 – 10) with the
memory buttons 1...5.
4
After a short while the function ends auto-
matically.
ENGLISH
Selecting a track
1
Keep pressing the
rocker switch
until the
number of the track you want to hear, e.g.
»
Tr. 06
«, appears in the display.
CD playback functions
See the ”CD mode” section on page 12.
Other AUX connections
If you are not using a GRUNDIG CD changer,
you can also connect other CD players or exter-
nal devices to the car radio using the
Hadok/GRUNDIG CDP adapter (available as
an accessory).
1
Keep pressing
SOURCE
until »AUX«
appears in the display (only if a CDP
Adapter is connected).
Note:
You must operate the connected devices them-
selves. See the relevant operating manuals.
EXPERT LEVEL
14
ENGLISH
14
EXPERT LEVEL
_______________________________________________________________________________________________________
6
To carry out the next setting repeat steps
2
to
5
.
7
To quit expert level keep pressing
SOUND
until you hear the signal.
The individual settings
1: Language – English, German, French,
Italian: the selection of display languages.
2: Protection – Code settings to prevent theft –
see the detailed instructions starting on page
16.
3: ON Volume – Volume limit when switching
on.
– Display: »ON Volume ––«: no limit.
– Display: »ON Volume 00« to »ON Volume 30«:
a limit is entered.
4: Loudness – Boosts low frequencies at low
volumes
– Display: »Loudness« »low«, »normal« or
»high«.
5: SCV – Speed Controlled Volume
– Display: »SCV: Off«. SCV 1...140.
9: Beep – Signal tone on/off
– Display: »Beep On« – Signal tone for confirming
functions.
– Display: »Beep Off« – Functions are confirmed
by a brief muting of the loudspeakers.
10: AM Band – On/off
– Display: »On« – The AM range can be selected.
– Display: »Off« – The AM range is switched off.
11: SW Band – On/off
– Display: »On« – The SW range can be selected.
– Display: »Off« – The SW range is switched off.
12: Search level– Search sensitivity
– Display: »Local« – Reduced search sensitivity.
– Display: »DX« – Immediate increased sensitivity.
13: RDS Regional – Automatic changing of the
regional station
– Display: »On« or »Off«
– Display: »RDS Regional On« – Frequency
change only possible between regional stations.
– Display: »RDS Regional Off« – Station change
via automatic search.
14: Date Format
– Display: »DDMMYY« or »YYMMDD«
15: Clock »On«, »Off« or »RDS« (RDS synchro-
nisation)
Note: With RDS synchronisation, settings 16 -
18 disappear. When Time is Off, settings
15-19 disappear.
A setting is only possible if there is a speed con-
trolled signal at the SCV connection (A1).
» SCV: Off« : SCV is switched off
» SCV: 140 « : Maximum effectiveness
The speed change while driving is shown in the
top right section of the display, e.g. +4.
6: TP Mode – TP function on/off
- Display: on/off
When TP is »off«, the »
TP
« button is inactive.
7: TP Volume – Minimum volume for radio traf-
fic news.
– Display: »TP Volume 5« to »TP Volume 30«.
Volume level, bordered display.
8: Phone – Muting in car phone mode.
– Display: »Mute« – Muting of the car radio is
activated.
– Display: »Off« – Muting of the car radio is
not activated.
– Display: »On« – You hear the phone via the
speakers.
Note:
The phone mute signal (see page 17) must be
connected.
