GRUNDIG Service
Allixx SCD 5410 DAB
1 - 10
8
ENGLISH
2
To store a station, press »
1
«, »
2
«, »
3
«, »
4
«
or »
5
« until you hear a signal or muting.
Selecting stored stations
1
Press the
memory button
briefly.
– Display: the stored station, e.g. »
ENERGY
«.
The stations remain stored even if the device
is disconnected from the power supply.
Activating and deactivating TP
(Traffic Program)
1
To switch this function on and off, press
TP
.
– Display: »TP«.
Note:
If you are tuned to a station which does not
broadcast traffic news, the device automati-
cally searches for the next station which
does.
If the TP function is activated, the CD or Tape
mode is also interrupted for traffic news.
Search
1
Press
rocker switch
to select a new stati-
on.
Starting the IS search in
DAB mode
after
switching on the device for the first time:
2
Press the upper
soft key
to select IS.
3
Start the search with the lower
soft key
(GO).
You can only select known ensembles.
Manual station search
1
Press the upper
soft key
to select MAN.
2
Use the
rocker switch
to change the fre-
quency in incremental steps.
3
Hold down the
rocker switch
for fast
tuning. Press it repeatedly to increase or
decrease the FM frequency by 50 kHz.
Storing stations in the memory
Selecting the DAB or FM memory level
1
Keep pressing »
I
I
I
« until the FM1 - FM3 or
DAB1 - DAB3 memory level is active.
RADIO (TUNER) MODE
_________________________________________________________________________________
Selecting the radio input source
1
With
SOURCE
you select the RADIO FM or
RADIO AM input source.
Note:
When the device is connected for the first
time, the RDS (IS) search starts automatically.
When you select a new frequency band, the
most recently selected station is played (Last
Station Memory).
RADIO
DAB
RADIO (TUNER) MODE
___________________________________________________________________________________________
ENGLISH
9
Activating and deactivating the AF
function
1
To switch it on and off, press »
I
I
I
« until AF
ON or AF OFF appears in the display.
– Display: »AF ON« when the AF function is
on.
Note:
You can only activate or deactivate the AF
function for RDS stations which broadcast
alternative frequencies.
Intelligent search (IS)
The intelligent search first stores RDS stations,
followed by the other stations in order of signal
strength. When the IS search is completed up to
30 stations are stored. You will hear the station
with the best reception. The IS is always activ-
ated, unless you have selected another search
function.
DAB note
If you enter a new DAB broadcasting region,
you can start the IS search to check whether
you are able to receive new ensembles.
Intelligent search (IS)
1
Press the upper
soft key
to select IS.
2
Start the search with the lower
soft key
(GO).
– Display: »
IS---·
«.
Note:
However, you can stop the search by press-
ing one of the station buttons »
1
« – »
5
« or
the advance button.
Viewing the IS memory
1
Once the IS search is complete, use the
rocker switch
to select the station you
want to hear.
– Display: »
IS-Scan
«.
Tuning to stations with station
search
1
Press the upper
soft key
to select SRC.
2
Press the
rocker switch
to start the search
in the desired direction.
3
If a station is found, its code appears in the
display.
Scan function
You can hear stations which can be received for
10 seconds each.
1
Press the upper
soft key
until »SCN«
appears in the display.
2
Use the lower
soft key
(»CLR«) or the
rocker switch to end the scan function. The
last station selected is played.
Additional TP functions
1
To interrupt the current traffic news briefly
press the
TP
button.
– The device remains in standby mode for
the next announcement.
2
Press
TP
again to switch off the traffic news
standby. The TP symbol disappears from the
display.
3
You can preselect the volume for all traffic
announcements. To set it, select the EXPERT
level (see page 13).
4
If you only want to hear traffic news, press
TP
to activate the TP function and then turn
the
volume knob
to zero.
Viewing the PAD/radiotext
1
Press
DISPLAY
.
2
The upper soft key switches to date, time and
one-line radiotext.
3
The lower soft key switches to two-line radio-
text.
