Advance CC
Allgemeiner T
eil / General Section
GRUNDIG
Service
1 - 13
Skipping or repeating tracks
APF = Automatic Program Finder
Prerequisite
are pauses of at least 3 seconds between
music selections (without announcer text or
the like).
Not suited
are music selections with very quiet passages
(e.g., classical music) because such passages
are treated as pauses.
Skipping the currently played track:
Briefly press the
>
button. The display
indicates ”
APF +1
”.
Skipping tracks, eg. 4 (max. 9):
During fast forward wind, repeatedly press the
>
button until ”
APF +4
” appears in the
display.
Repeating the currently played track:
Briefly press the
<
button. The display
indicates ”
APF -1
”.
Repeating tracks, eg. 6 (max. 9):
During fast rewind, repeatedly press the
<
button until ”
APF -6
” appears in the
display.
Traffic announcements
Switching on AIM TP
Hold down
¡
AIM TP
button briefly
»
TP
« appears in the display.
Switching off AIM TP
Hold down
¡
AIM TP
button briefly
»
TP
« disappears from the display.
Ejecting the cassette
Briefly press the
“
.
U III
button.
Ending cassette play
Radio mode:
press the
¡
RADIO
button.
or
briefly press one of the station
buttons
1 2 3 4 5
.
CD mode:
press the
¡
CD
button.
The cassette remains in the compartment!
Cassette
¡
AIM TP
1
–
2
<
“
.
U III
>
¡
CD +
¡
RADIO
¡
CD
¡
CD –
EXPERT
Settings
EXPERT
A great number of possible settings
To make car radio operation as easy as possi-
ble, numerous settings that you need only
once or occasionally are located in an additio-
nal control level (EXPERT).
Setting
1. Activating the EXPERT function
Press the
“
LOUD
EXPERT
button until the signal
sounds.
2. Selecting settings
Select from
the setting you wish to check or alter.
Example:
Turn the
¢
¢
rotary knob until the desired
setting "
LCD 25
" appears in the display.
1
Change display contrast
Possible settings
1
…
«R
3. Activating the setting
Briefly press the
“
LOUD
EXPERT
button:
"
E
" appears in the display
4. Changing the setting
Set the desired contrast using the
¢
¢
rotary
knob. The display indicates, for example:
5. Ending the setting
Briefly press the
“
LOUD
EXPERT
button:
"
E
" disappears from the display.
6. Selecting the next setting
(repeat the steps 2 to 5).
7. Deactivating EXPERT
Press the
“
LOUD
EXPERT
button until the signal
sounds.
RDS –
–
– TP AF LOUD MONO
)
g
CR
DX
E
LCD
888
53
RDS –
–
– TP AF LOUD MONO
)
g
CR
DX
E
LCD
888
25
Possible settings
1
…
«R
Display shows: »
......
«
1
Activate coding
If »
CODE
« appears in the display the
coding is not activated.
If »
SAFE
« appears in the display the
coding is activated.
2
Change display contrast
»
LCD 25
« (00 … 63), adjust according
to installation position of car radio.
Setting can best be adjusted “at dark”.
3
Display colour
Vario-Color (from green to red)
»
COL 25
« (00 … 53).
4
Security LED (on/off)
»
BLK ON
« CD button flashes when unit,
LED, and ignition are off.
»
BLK OFF
« CD button does not flash.
5
Signal tone (on/off)
»
BEEP ON
« A signal tone sounds when
functions are changed.
»
BEEP OFF
« No signal tone sounds when
functions are changed.
LCD 25
EXPERT
6
AM ON
The AM reception area
(153 … 279 … 531 … 1602) is switched
off by »
AM OFF
«.
Then the Radio button has no function.
7
Auto LEARN (radio mode)
If you are in a reception area where “RDS
channels with traffic radio reports” cannot
be received well, you can suppress the
“Auto LEARN (LRN) during radio operation”.
»
LRN ON
«: Auto LEARN
»
LRN OFF
«: no Auto LEARN when volume
is set higher than »
VOL 4
«.
8
Automatic changes between regional
broadcasts
If an RDS channel consists of different
re-gional broadcasts, it can occur that your
car radio switches between different
regional broadcasts because of the recepti-
on area.
»
REG ON
« automatic switching between
regional broadcasts is possible.
»
REG OFF
« no switching to a different
regional broadcast.
9
Switching on and off with the ignition
switch
»
IGN ON
« You can switch the car radio on
and off with the ignition switch.
»
IGN OFF
« Switching on and off only with
the
¢
¢
rotary knob.
§I
Mute during phone mode
with car telephone
»
PHONE OFF
« no evaluation of the
telephone connection
»
PHONE ON
« The car radio is muted auto-
matically when a telephone
call is made.
»
PHONE IN
« The car radio is switched on
automatically when a tele-
phone call is made, and the
conversation is heard
through the speakers.
When you change the sound and geometry
settings during a telephone conversation,
these settings are stored for the next tele-
phone conversation.
Please read the notes in the chapter
»Warning when using automatic aerials«
on page 3!
The previous sound and geometry settings are
reactivated when the unit is switched back to
radio mode.
§?
CD input sensitivity
Adjusting the CD player: (Internal CD part)
»
CDS MID
« middle
»
CDS HIGH
« high
»
CDS LOW
« low
§?
CD input sensitivity
Adjusting of a CD player: (e.g. MCD 30)
»
MCD LOW
« low
»
MCD MID
« middle
»
MCD HIGH
« high
§Q
Volume limitation during switching-on
»
ONVOL - -
«: no limitation or
»
ONVOL 35
«: maximum volume, e.g. 20
(- - … 11 … 35).
The volume is only limited if the volume of
the car radio at switch-off is higher than
the set value!
§W
Minimum volume for traffic announce-
ments
»
TA VOL 16
« (5 … 35)
For reasons of traffic safety the vol-
ume for announcements should not be set
too high!
EXPERT
Volume
§E
Speed dependent volume
» SCVOL « (0 … 67)
Setting is only possible if a speed depend-
ent signal is emitted at the
SCV connection (A1).
»
SCVOL - - -
«: SCV switched off
»
SCVOL 0 67
«: Maximum effect
The resulting increase in volume is indicated
by the left digit (or digits).
For experts: Numerical value x 1.25 = volume
increase in db (max. 20 db).
Examples:
»
SCVOL 16
*
67
« : Maximum set effect.
Maximum volume
increase
»
SCVOL 8
*
67
« : Maximum set effect.
Medium volume increase
*
These numbers appear only while the vehicle is in mo-
tion and of acorresponding speed.
A change of this number occurs only while
the vehicle is in motion
(condition: Setting EXPERT Menu).
For reasons of traffic safety, the fol-
lowing adjustment should be done by the
passenger!
Adjustment:
1. Vehicle is stopped, engine is running:
Set desired volume with
¢
¢
rotary knob.
2. Prepare EXPERT setting:
Hold down
“
LOUD
EXPERT
button until signal tone
sounds. Turn
¢
¢
rotary knob until
»
SCVOL ...
« in the display. Press
“
LOUD
EXPERT
button briefly until »
E
« appears.
3. For higher speed:
Set desired volume with
¢
¢
rotary knob,
e.g. »
SCVOL 60
« in display.
Hold down
“
LOUD
EXPERT
button until signal tone
sounds.
Acoustics system
You can adjust the bass and the treble for the
front and the rear speakers separately.
You can adjust the settings between – 3 and
+ 3 with the
¢
¢
rotary knob.
§R
Bass – front speakers
»
BAS F 0
« (F = Front)
§T
Bass – rear speakers
»
BAS R 0
« (R = Rear)
§Z
Treble – front speakers
»
TRE F 0
« (F = Front)
§U
Treble – rear speakers
»
TRE R 0
« (R = Rear)
«I
Switch-on/off delay for connected booster
(Switching voltage for booster = contact C6)
»
BDLY ...
« (O6 … 99)
In case of “switching noises”: increase or
decrease set value until switching noises
are no longer audible.
«?
AIM function (on/off)
»
AIM ON
« or
»
AIM OFF
« – no AIM memory standby
when car radio is switched off
«`
AIMT standby
»
AIMT 2:00
«
Period of time during which traffic announ-
cements are recorded after the device has
been switched off.
Available settings:
min. 1 minute, max. 4 hours.
«Q
AIM TIMER 1 (switch-on time 1),
➭
page 13: AIM function.
Current time is set:
1
or
2
!
»
T 1 OFF
« : TIMER 1 is off
»
T 1 23:59
«
Ç
»
T 1 OFF
«
Ç
»
T 1 00:01
«
Turn
¢
¢
rotary knob quickly:
quick change of the switch-on time.
