ENGLISH
52
uSBrECorDING
--------------------------------------------------------------------------------------------------------------
Connectingexternaldatamedia
Notes:
7
Before connecting the external data medium
it is recommended to switch the television to
stand-by mode.
7
Before removing the external data medium,
the television must be switched to standby,
so that no data loss occurs.
7
Your television features two USB sockets,
»
uSB1
« and »
uSB2(HDD)
«.
»
uSB2(HDD)
« is used to connect data media,
which require an additional power supply
– for example, external hard disks.
1
Connect the »
uSB2 (HDD)
« socket of the
television and the corresponding socket of
the data medium (external hard disk) using
a USB cable;
or
insert the USB plug of the USB memory stick
into the »
uSB1
« socket of the television.
Notes:
7
The »
uSB1
« socket of the television sup-
plies a maximum power of 500 mA in ac-
cordance with USB specifications. External
hard disks which require more power may
therefore only be connected to the »
uSB2
(HDD)
« of the television.
7
If you use a network cable for external hard
disks which have been connected to the
»
uSB2(HDD)
« socket of the television, this
network cable must also be disconnected
from the power supply when the television is
switched off.
7
External data media may not be disconnect-
ed from the television while files on the data
medium are being accessed.
SettingsforuSBrecording
Selectingthemenu
1
Open the menu with »
mENu
«.
2
Select the menu item »USB RECORDING«
with »
v
« or »
Λ
« and press »
oK
« to confirm.
– The »USB RECORDING« menu appears.
PRnP
Disk
Safely Remove Disk
Auto Preview
USB
On
Permanent Timeshift
Exit
Back
USB RECORDING
Manage data medium
Capacity Used
%3
Used (MB)
1249
Total (MB)
38145
Remaining SD recording time
1,008 min
Remaining HD recording time
288 min
08.08.2012
15:46
OK
On