31
ENGLISH
3DFuNCtIoN
-------------------------------------------------------------------------------------------------------------------------
DualGaming
Dual Gaming enables full-screen display of
games in the "two-player mode". To do this,
both gamers must use the correct Dual Gaming
glasses.
Notes:
7
Dual Gaming only works with 2D games in
the "two-player mode". 3D games are not
supported.
7
To ensure that each player can see the
corresponding game view, the correct
glasses must be used.
7
It is not possible to display 3D content with
the Dual Gaming glasses.
7
The Dual Gaming glasses are not supplied
with your television set. Use glasses with
the order number ZDZ000 / ZDN000 or
contact your specialist retailer.
7
Position yourself in front of the television so
that the middle of the screen is at eye level.
This ensures that the images from both game
views do not interfere with each other.
7
The content of the games is scaled up to
the full-screen size. This can cause image
distortion.
1
Connect the games console to the »
HDmI
«,
»
CompoNENtYpbpr
«, »
vGA
«,
»
Av1
«, »
Av2
« or »
S-vHS
« socket.
2
Select the »Select signal source« menu with
»
«.
3
Select the signal source used to connect the
games console »
<
«, »
>
«, »
v
« or »
Λ
« and
confirm with »
oK
«.
4
Open the menu with »
mENu
«. Select the
menu item »PICTURE SETTINGS« with »
v
«
or »
Λ
« and press »
oK
« to confirm. Select
the line »Picture Mode« with »
v
« or »
Λ
«,
select the option »Game« with »
<
« or »
>
«
and press »
oK
« to confirm. Press »
mENu
«
to end the setting.
5
Start the game on the games console and
select the "Two-player Mode".
6
Press »
3D
« and use »
<
« or »
>
« to select
the required option (»Side by Side« or »Top
Bottom«). This is dependent on the game
used in the games console.
– »Side by Side«, two images are displayed
next to each other.
– »Top Bottom«, one image is shown above
the other.
7
Put on the Dual Gaming glasses.
Notes:
7
The content of both screens is displayed in
full-screen mode.
8
End Dual Gaming, press »
3D
«, use »
<
« or
»
>
« to select the option »Off« and confirm
with »
oK
«.