Grundig 40 VLE 8160 BL, User Manual

Page: 20 / 82

­21
ENGLISH
SEttINGS
­-----------------------------------------------------------------------------------------------------------------------------------------
picture­settings­
1
Open the menu with »
mENu
«.
2 Select the menu item »PICTURE SETTINGS«
with »
v
« or »
Λ
« and press » oK « to confirm.
– The »PICTURE SETTINGS« menu appears.
Picture Mode User
Brightness 50
Sharpness 75
Colour Temperature
DNR
Medium
Off
Contrast 100
Colour 65
Mpeg NR. Off
Exit
Back
PICTURE SETTINGS
Enhanced picture settings
20.09.2010
15:46
3 Select the line »Picture Mode«, »Bright-
ness«, »Contrast«, »Sharpness«, »Colour«, or
»Colour Temperature« with »
v
« or »
Λ
«.
Select the value with »
<
« or »
>
« and press
»
oK
« to confirm.
Notes:
7
When changing the values with »
<
« or »
>
«,
the screen will be split. You can see the
current picture value on the left side, the
new setting on the right side. This feature is
not supported in 3D mode
7
In the »PICTURE SETTINGS« menu you can
also find other additional settings.
4
Select the line »DNR«, »Mpeg NR«, »Vibrant
Colour«, »Perfect Clear«, »Film Mode«,
»Gamma«, »Dynamic Contrast«, »Dynamic
Backlight«, »Backlight« or »MEMC« with
»
v
« or »
Λ
«.
Select the value with »
<
« or »
>
« and press
» oK « to confirm.
Notes:
7
You can only select the »Mpeg NR« function
on digital and AV presets.
»Mpeg NR« reduces any interference from
artefacts (pixel blocks) from digital pro-
grammes due to MPEG compression (such
as from DVB-T receivers or DVD players).
7
The »Film Mode« detects and processes
feature films automatically for all channel
sources. This means you will always receive
an optimal picture.
This functions in the modi 480i, 576i and
1080i in TV playback and for other channel
sources.
If the »Film mode« is switched on for pro-
grammes without a feature film signal, minor
problems such as picture freeze, defective
subtitles or fine lines in the picture could
occur.
7
The function »Dynamic Contrast« adapts the
contrast dynamically and optimally for the
respective picture content.
7
With »Dynamic Backlight«, the device opti-
mally adapts the background lighting to the
picture content.
7
The »Backlight« can only be set manually
when the function »Dynamic Backlight« is
deactivated.
7
»MEMC« (Motion Estimation, Motion
Compensation) provides fluidity for the
picture in active pictures or fast camera
shots. »MEMC« feature only appears
in the menus of the 100Hz products.
In 100Hz products, MEMC feature of the TV
may not function properly for signals out of
60 Hz vertical scanning frequency (56Hz,
75Hz) as PC resolution from PC source. If
you want MEMC feature to function prop-
erly for such resources, make sure that the
source you have connected has 50Hz or
60Hz vertical scanning frequency.
5 Press » mENu « to end the setting.