Grundig 40 VLE 565 BG User Instructions Download

Page: 60 / 60

ENGLISH

60

INFORMATION

---------------------------------------------------------------------------------------------------------------------

Troubleshooting

If the information provided below does not help, please consult an authorised GRUNDIG dealer.

Please bear in mind that malfunctions can also be caused by external devices such as video recorders

or satellite receivers.

Note:

This is a Class A product. During operation the device could cause radio interference. In this case

the user may have to remedy this. Please contact your specialist dealer.

Problem

Possiblecause

Remedy

Screen lit (snow), but no

station visible

Antenna cable

Is the antenna cable connected?

No TV channel tuned

Start a channel scan

Insufficient contrast in picture

The picture settings are not correct

Adjust the brightness, contrast or

colour setting

Problem at station

Try another channel

Picture and/or sound distorted Interference from other devices

Place the device in a different position

Ghosting, reflection

Channel setting

Automatic or manual tuning/fine tuning

Antenna

Have antenna cable or system checked

No colour

Colour intensity too low

Turn up the colour

Adjust TV standard (if setting option

is available)

Select the correct colour standard

Problem at station

Try a different channel

Picture but no sound

Volume is set to a minimum

Turn up or switch on the volume

Teletext impaired or absent

Problem at station

Try a different channel

Television channel (no teletext)

or antenna system

Try with a different TV channel,

carry out fine tuning

Station signal too weak

Check antenna

The remote control does

not work

Obstacle between remote control

and device.

Point remote control at television

Battery problem

Check batteries and replace if

necessary

Operating mode undefined

Switch off the television at the mains

switch for two minutes

Picture too dark in PC mode

Incorrect setting for picture resolution

and picture frequency on the PC

Change settings on the PC

(e.g. 1280 x 768 resolution,

refresh rate 60 Hz)

Summary of Contents for 40 VLE 565 BG





























































Search results

Summary of Contents for 40 VLE 565 BG

Reviews:

Related manuals for 40 VLE 565 BG

Brands by name

Popular brands

Grundig 40 VLE 565 BG, User Instructions

Search results

Summary of Contents for 40 VLE 565 BG

Reviews:

Related manuals for 40 VLE 565 BG

Brands by name

Popular brands