background image

7

 

   Limited Warranty

UPS15, 26, 43 circulator pumps manufactured by GRUNDFOS 

PUMPS CORPORATION (GRUNDFOS) are warranted to the original 

user only to be free of defects in material and workmanship for a period 

of 36 months from date of manufacture.  GRUNDFOS' liability under 

this warranty shall be limited to repairing or replacing at GRUNDFOS' 

option, without charge, F.O.B. GRUNDFOS' factory or authorized 

service station, any UPS15, 26, 43 or UP15-42F circulator pump.  

GRUNDFOS will not be liable for any costs of removal, installation, 

transportation, or any other charges which may arise in connection 

with a warranty claim.

All other UP and UPS small circulators manufactured by GRUNDFOS 

PUMPS CORPORATION (GRUNDFOS) are warranted to the original 

user only to be free of defects in material and workmanship for a period 

of 24 months from date of installation, but not more than 30 months 

from date of manufacture.  GRUNDFOS' liability under this warranty 

shall be limited to repairing or replacing at GRUNDFOS' option, without 

charge, F.O.B. GRUNDFOS' factory or authorized service station, 

any product of GRUNDFOS manufacture.  GRUNDFOS will not be 

liable for any costs of removal, installation, transportation, or any 

other charges which may arise in connection with a warranty claim.  

Products which are sold but not manufactured by GRUNDFOS are 

subject to the warranty provided by the manufacturer of said products 

and not by GRUNDFOS' warranty. 

GRUNDFOS will not be liable for damage or wear to products 

caused by abnormal operating conditions, accident, abuse, misuse, 

unauthorized alteration or repair, or if the product was not installed 

in accordance with GRUNDFOS' printed installation and operation 

instructions.

To obtain service under this warranty, the defective product must be 

returned to the distributor or dealer of GRUNDFOS products from 

which it was purchased together with proof of purchase and installation 

date, failure date, and supporting installation data.  Unless otherwise 

provided, the distributor or dealer will contact the GRUNDFOS factory 

or authorized service station for instructions.  Any defective product 

to be returned to the factory or service station must be sent freight 

prepaid; documentation supporting the warranty claim and/or a Return 

Authorization must be included if so instructed.

GRUNDFOS WILL NOT BE LIABLE FOR ANY INCIDENTAL OR 

CONSEQUENTIAL DAMAGES, LOSSES, OR EXPENSES ARISING 

FROM INSTALLATION, USE, OR ANY OTHER CAUSES.  THERE 

ARE NO EXPRESS OR IMPLIED WARRANTIES, INCLUDING 

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, 

WHICH EXTEND BEYOND THOSE WARRANTIES DESCRIBED OR 

REFERRED TO ABOVE.

Some jurisdictions do not allow the exclusion or limitation of incidental 

or  consequential  damages  and  some  jurisdictions  do  not  allow 

limitations on how long implied warranties may last.  Therefore, the 

above limitations or exclusions may not apply to you.  This warranty 

gives you specific legal rights and you may also have other rights 

which vary from jurisdiction to jurisdiction.  

Summary of Contents for UPS 15









Reviews: