Grundfos KPL.700-1400, Service Instructions Manual

Page: 8 / 14

English (GB)
8
5. Connect the elbow fitting (pos.15) to the intermediate fitting
(pos. 9).
6. Connect the sight glass (pos. 38) with isolating valve (fig. 1 ,
pos. 3) to the elbow fitting (pos. 15) with intermediate fitting
(pos. 9 and step 5).
7. Connect the sight glass (pos. 38) with isolating valve (fig. 1 ,
pos. 3) and fittings (pos. 15 and 9) to the isolating valve (pos.
17).
8. Completely loosen the handle (pos. 24).
9. Close the isolating valve (pos. 31). Fit the assembled oil pipe
(pos. 35) in the lower oil plug space (pos. 33). See fig. 6 .
10. Open the isolating valves (pos. 17 and 37).
11. Slowly fasten the handle (pos. 24) until the oil level is visible
in the sight glass (pos. 38).
12. Wait until the oil level has stabilised.
13. Check the oil level marked "MIN" according to the pipe column
diameter. See fig. 6 , detail A.
14. After the oil level check, loosen the handle (pos. 24) to close
the non-return valve (pos. 34).
15. Open the isolating valve (pos. 31), and drain the remaining oil
from the sight glass (pos. 38) into an appropriate waste
disposal container.
16. Disassemble the oil pipe and place it in the suitcase (fig. 1 ) for
storage.
17. Fit oil and casing plugs (fig. 3 , pos. 26-29).
T
M
06
32
09
50
14
T
M
06
32
10
50
1
4
T
M
06
32
11
50
14
Note
Handle the sight glass (pos. 38) with care.
15 9
3