Grundfos KPL.700-1400, Service Instructions Manual

Page: 11 / 14

English (GB)
11
4.3 Filling oil
Fig. 11
Filling oil, KPL.900-1400, KWM.900-1400
Where nothing else is indicated, the position numbers refer to fig.
11 and/or the figure below each step.
1. Disconnect the rod (fig. 7 , pos. 9) from the handle (pos. 18).
2. Connect the handle (pos. 18) to the assembled oil pipe (pos.
27).
3. Disconnect the plug (fig. 7 , pos. 14) from the four-way tee
fitting on the assembled oil pipe (pos. 27).
4. Connect the funnel (pos. 11) to the intermediate fitting (pos.
5).
5. Connect the assembled funnel and fitting to the assembled oil
pipe (pos. 27).
6. Fit the assembled funnel, fitting and oil pipe in the upper
casing plug space (pos. 30). See fig. 11 .
7. Close the isolating valve (pos. 26).
8. Pour the recommended quantity of oil through the funnel (pos.
11). See section
5. Oil quantity
.
9. After completing the oil filling, disconnect the assembled oil
pipe (pos. 27).
10. Refit the plugs (fig. 9 , pos. 21 to 24).
TM
06
32
26
50
14
Pos. Description
5 Intermediate fitting
11 Funnel
18 Handle
25 Non-return valve
26 Isolating valve
27 Assembled oil pipe
28 Upper oil plug space
30 Upper casing plug space
TM
0
6
3
227
5
014
TM
06
32
28
50
14
T
M
06
32
29
50
14
11
5
18
26
27
30
28
25
Oil
18
9
18
27
14
27
TM0
6
323
0
5
0
1
4
TM
06
32
31
50
14
Note
The non-return valve (pos. 25) prevents oil from
leaking.
Note
The air inside the oil chamber escapes through
the upper oil plug space (pos. 28) due to the
difference in diameter.
11 5