Grundfos GI SPC 03 65 10, Installation And Operating Instruction

Page: 3 / 34

3
E
ng
lish
(G
B) English (GB) Installation and Operating instructions
Original installation and operating instructions.
CONTENTS
Page
1 Safety instructions 4
1.1 Symbols used in this document 4
1.2 Danger 4
1.3 Warnings 4
1.4 Waste disposition 4
1.5 Purchase inspection before installation 4
1.6 Safety instructions for the operator/user 4
2 Introduction 5
3 Product Overview 5
3.1 Features 5
4 Technical data 6
4.1 Product range 6
4.1.1 Dimension 6
4.2 Technical data 7
4.2.1 Low Voltage Range (3 x 220 V) 7
4.2.2 High Voltage Range (3 x 380 V) 7
5 Installation 8
5.1 Installation Example 8
5.2 Cable Specification 8
5.3 Mechanical Installation 8
5.4 Electrical Installation 9
5.4.1 Control circuit wiring 9
5.4.2 Terminal arrangement 9
5.4.3 Terminal arrangement Description of function
terminals
10
5.4.4 Electrical wiring 10
AC input and output connections 10
DC input connections 10
Communication cable connections 11
6 Keypad Operation Procedure 12
6.1 Keypad introduction 12
6.2 Keypad display 13
6.2.1 Stop state parameter display 13
6.2.2 Running state parameter display 13
6.2.3 Fault state display 13
6.2.4 Function code editing state display 13
6.3 Keypad operation 14
6.3.1 Function code modification. 14
6.3.2 Password Setting 14
6.3.3 Monitoring Pump controller state 14
7 Parameters 15
7.1 Special function parameters 22
8 Fault finding 28
8.1 Fault codes and remedies 28
8.2 Fault codes reset 30
8.3 Fault history 30
8.4 LED Indications 30
9 Service and maintenance 31
9.1 Routine inspection 31
9.2 Storage and warranty 31
9.2.1 Storage 31
9.2.2 Warranty 31
10 Disposal 31
Warning
Prior to installation, read these installation
and operating instructions. Installation and
operation must comply with local
regulations and accepted codes of good
practice.