Grundfos FV Installation And Operating Instructions Manual Download Page 12

English (GB)

12

4.3.3 Connecting a suction lance to a container without 

opening provided

4. Cut a hole (

60) into the container top surface and insert the 

suction lance.

5. Fix the suction lance with the counter nut.
6. Adapt the immersion depth of the suction lance 

(see section 

4.3.1

).

Immersion depth of suction lances

When using other containers, the required immersion depth must 
be determined by measurement.

Counter nut

5. Maintenance and service

 

5.1 Maintenance

Clean the strainer,
• if it is soiled
• if the suction performance drops.

5.1.1 Cleaning the strainer

1. Shut down the dosing system.
2. Suction lances or foot valves with level indication: disconnect 

signal line from the pump or downstream device.

3. Remove suction line from the dosing head. If existing, remove 

deaeration line from the dosing head.

4. Take suction lance or foot valve out of the container.
5. Empty the suction lance.
6. Suction lance: Unscrew inlet with strainer unit from the bottom 

of the suction lance and clean it.
Foot valve: Unscrew inlet with weight and strainer from the 
valve, remove the strainer and clean it.

Fig. 13

Foot valve (left), suction lance (right): removing the 
strainer

5.2 Service

Foot valves and suction lances cannot be repaired.

Container type

Volume [l]

Immersion 

depth [mm]

Grundfos cylindrical tank

40

400

1000

1200

Grundfos square tank

100

470

Dimensioned drawing

Dimensions

Adaptor type

Material, 

colour

Product No.

D1

L1

T

M

04

 84

9

2

 06

1

2

G 2

21 mm

Counter nut for drums with opening of 
60 mm (without thread), e.g. 100-litre 
square tank or 1000-litre cylindrical tank

PVC, grey

98071170

/

'

Caution

Clean the strainer of the foot valve or suction 
lance regularly, depending on the degree of 
pollution.

TM

04

 85

22

 1

11

2

Summary of Contents for FV

















Reviews: