5 |
P a g e
Thank you for choosing a DPC Series Digital Pump Controller.
The Digital Pump Controller model is easy to use, programmable controller and
protection device for direct start with single phase two pumps with output power
from 0.37kW - 1.5 kW (1.5 - 15A) each.
The controller has many operation modes for adapting different pumping
applications. Important features that distinguish the DPC Series Digital Pump
Controllers from other controllers are the push button calibration for overload and
the ability of dry run protection without float switches. It shows pump parameter,
status and faults, etc.
APPLICATIONS:
The controller is useful in all cases where there is a need to control and
protect two pump installations and managing the automatic operation by a
variety of switching methods.
Typical applications:
Water supply
Irrigation
Sewage
Booster sets
Rainwater reuse
Stormwater
FEATURES:
Built-in function switch for:
-
Drainage by liquid level control through float switches
-
Boosting water supply by pressure control through pressure switch and tank
-
Transfer of water by liquid level control through float
switches Dry run protection without float switches
Auto/ manual switch with screen lock in AUTO mode
Dynamic LCD displaying for pump running status
Protect the pump against many faults
Push button calibration
Pump accumulative run
time Last five fault records
RS485 communication Modbus
Starts and stops the pump in accordance with liquid levels or pressure settings
Pump shaft anti rust feature
INTRODUCTION
