Time displaying icon, when this icon
appears, it means controller is displaying
some parameter of time, eg: pump dry
run trip time (units: seconds)
Pump fault icon, when this icon
appears, it means controller is
displaying some fault condition
The parameter configuration icon,
when this icon appears, controller is in
manual parameter adjustment mode.
Please read this manual carefully before starting installation and operation. Any
damage to the equipment caused due to failure to comply with the descriptions
in this manual in installation or operation will be beyond the scope of the
company’s quality guarantee.
Controller installation and wiring will need the following tools.
You also can choose the right tools according to your own experience.
LCD SCREEN
Minute
Second
Hour
Voltage
Ampere
CONTROLLER COMPONENTS:
DIP SWITCH SETTINGS
Users can set the function switch to suit different applications. Before setting
the function switch, the unit should be disconnected from the power supply.
After completing the settings of dip switches, power may be applied to the unit.
Following signs will be displayed in voltage displaying area on the LCD
conforming to the following list.
MEANING OF THE ICONS SHOWN ON THE LCD
7
6
Applied for drainage by liquid level control through
float switch
ON
1 2
3
Applied for water supply by pressure control through
pressure switch & pressure tank
ON
1 2
2
Applied for water supply by liquid level control through
probe/float switch
ON
1 2
1
ITEM
MESSAGES & IN
VOLTAGE DISPLAYING AREA
SWITCH
POSITION
ITEM
ELECTRIC DRILL
CROSS SCREWDRIVER
INSTALLATION
CRIMPING PLIER
