background image

LIMITED WARRANTY

Products manufactured by GRUNDFOS PUMPS CORPORATION (Grundfos) are warranted 
to the original user only to be free of defects in material and workmanship for a period 
of 24 months from date of installation, but not more than 30 months from date of manu-
facture. Grundfos’ liability under this warranty shall be limited to repairing or replacing 
at Grundfos’ option, without charge, F.O.B. Grundfos’ factory or authorized service 
station, any product of Grundfos’ manufacture. Grundfos will not be liable for any costs 
of removal, installation, transportation, or any other charges which may arise in connec-
tion with a warranty claim. Products which are sold but not manufactured by Grundfos 
are subject to the warranty provided by the manufacturer of said products and not by 
Grundfos’ warranty. Grundfos will not be liable for damage or wear to products caused 
by abnormal operating conditions, accident, abuse, misuse, unauthorized alteration or 
repair, or if the product was not installed in accordance with Grundfos’ printed installa-
tion and operating instructions.

To obtain service under this warranty, the defective product must be returned to the 
distributor or dealer of Grundfos’ products from which it was purchased together with 
proof of purchase and installation date, failure date, and supporting installation data. 
Unless otherwise provided, the distributor or dealer will contact Grundfos or an autho-
rized service station for instructions. Any defective product to be returned to Grundfos 
or a service station must be sent freight prepaid; documentation supporting the 
warranty claim and/or a Return Material Authorization must be included if so instructed.

GRUNDFOS WILL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, 
LOSSES, OR EXPENSES ARISING FROM INSTALLATION, USE, OR ANY OTHER CAUSES. 
THERE ARE NO EXPRESS OR IMPLIED WARRANTIES, INCLUDING MERCHANTABILITY OR 
FITNESS FOR A PARTICULAR PURPOSE, WHICH EXTEND BEYOND THOSE WARRANTIES 
DESCRIBED OR REFERRED TO ABOVE.

Some jurisdictions do not allow the exclusion or limitation of incidental or consequential 
damages and some jurisdictions do not allow limit actions on how long implied warran-
ties may last. Therefore, the above limitations or exclusions may not apply to you. 
This warranty gives you specific legal rights and you may also have other rights which 
vary from jurisdiction to jurisdiction.

Summary of Contents for 10SQ-110



















Reviews: