Start-up
22 | 44
B
A
_
T
D3
-A
A
0
0
0
e
n
_
0
2
5
5
Start-up
The start-up is only allowed to be carried out by a specialist.
5.1 How to start up the product
1.
Open the shut-off valves.
2.
Open the nearest tap after the filter as far as it will go.
3.
Check the filter for leaks.
4.
Connect the mains plug to the socket.
»
LED 60d lights up (factory setting).
»
The filter is in operation
The filter does not automatically backwash during the initial
start-up, but waits until the set interval is reached. We therefore
recommend triggering a backwash manually.
The interval counter is then set to zero. The next backwash
takes place at the set interval.
5.
Trigger a backwash manually (refer to chapter 5.2.2).
»
The filter is vented by backwashing.
