Installation
19 | 44
B
A
_
T
D3
-A
A
0
0
0
e
n
_
0
2
5
4.3 Installing the product
In order for the water line on both sides of the filter to be
properly connected to the protective-equipotential bonding, we
recommend establishing a corresponding electrical bypass
according to DIN VDE 0100-540.
Use suitable tools for assembly and be careful not to scratch the
housing with your tool.
The transparent plastic film serves as transport and dirt
protection. We recommend leaving it on the device during
assembly and the construction phase to prevent soiling of the
white housing.
4.3.1 Installing the filter
1.
Install the water meter screw connection in the pipe (the
distance between the two seals must be 100 mm).
2.
Leave the protective caps on the threads.
The rotatable click-type connection flange allows the filter to be
adapted to any flow direction given on site.
