American Water Heater 240HX3 Installation Manual And Owner'S Manual Download Page 1

Page: 1 / 64

Gas Tankless Water Heater

Do not install the water heater with a recircula-

tion loop. Suitable for potable water heating only.

On-Demand Water Heater

Installation Manual and Owner’s Guide

If you have any questions, please call

or write to:

In the United States

500 Tennessee Waltz Parkway

Ashland City, TN 37015

Toll Free: 1-877-737-2840

- Do not store or use gasoline or other

flammable vapors and liquids in the vicinity

of this or any other appliance.

- WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.

• Do not touch any electric switch; do not

use any phone in your building.

• Immediately call your gas supplier from

a neighbor's phone. Follow the gas

supplier's instructions.

• If you cannot reach your gas supplier, call

the fire department.

- Installation and service must be performed

by a qualified installer, service agency or the

gas supplier.

WARNING

If the information in these

instructions is not followed

exactly, a fire or explosion may

result causing property damage,

personal injury or death.

Keep this manual near the water heater for future reference whenever maintenance, adjustment, or

service is required.

FEATURING

• ENDLESS HOT WATER

• ON-DEMAND USAGE

• COMPACT, SPACE SAVING

• ENERGY CONSERVATION

• COMPUTERIZED SAFETY

• NO PILOT LIGHT

• X3™ TECHNOLOGY

• Complies with SCAQMD Rule

1146.2 for natural gas Low NOx

Emissions of 14 ng/J or 20 ppm.

ANSI Z21.10.3

・

CSA 4.3

Models

240HX3
340HX3
540HX3

Summary of Contents for 240HX3

































































Search results

Summary of Contents for 240HX3

Reviews:

Related manuals for 240HX3

Brands by name

Popular brands

American Water Heater 240HX3, Installation Manual And Owner'S Manual

Search results

Summary of Contents for 240HX3

Reviews:

Related manuals for 240HX3

Brands by name

Popular brands