American Water Heater 240HX3 Installation Manual And Owner'S Manual Download

Page: 10 / 64

Page

Installation

Installation Manual

3. Neutralizer kit: 100112159

The neutralizer assembly neutralizes the condensate (acidic water) that forms in the secondary heat

exchanger of the water heater.

It connects to the condensate drain port of the water heater by using connectors included with the

neutralizer kit. (Refer to pages 34 and 35.)

1. Temperature remote controller:

100209924 (TM-RE42)

The temperature remote controllers have

three functions. It allows the output

temperature from the water heater

to be adjusted and it also works as a

diagnostic tool and it provides a concise

error code whenever there is a problem with the unit.

See the Troubleshooting Section (pages 53 to 55) for

information on possible error codes.

4. 3" PVC

concentric termination: 100112163

Used when terminating direct-vent (sealed combustion) systems, with Indoor models that require a 3ʺ intake

and a 3ʺ exhaust. This concentric termination provides the convenience of only having to make one penetration

through a sidewall instead of two separate penetrations for the intake

and exhaust piping. The termination includes a bird screen, restricting

small animals, pests, and foreign objects from entering into the vent

system.

2. Pipe cover:

100112718 (TH-PC03) for 240HX3/340HX3/540HX3

The pipe cover protects the plumbing

pipes to the water heater from

unexpected adjustments. This pipe

cover is fixed to the bottom of the

water heater, which hides the plumbing

and improves the visual aspects of the

whole installation for the water heater.

7. 4" PVC Adapter: 100113129

6. Non-return valve: 100113130

It is a must-have item for common

venting system. It prevents the

escape of combustion gas through

non-operating appliances. (Refer to

pages 28 and 29.)

This adapter transitions from the

Non-return valve outlet to 4"

schedule 40 PVC pipe.

5. Recess box:

It allows for “clean” installations. The water heater fits inside the recess box, which hides and protects the

whole water heater and plumbing.

For new construction application s -with flange

100306285

For retrofit applications - no flange

100298009

Summary of Contents for 240HX3

































































Search results

Summary of Contents for 240HX3

Reviews:

Related manuals for 240HX3

Brands by name

Popular brands

American Water Heater 240HX3, Installation Manual And Owner'S Manual

Search results

Summary of Contents for 240HX3

Reviews:

Related manuals for 240HX3

Brands by name

Popular brands