Iron / manganese removal
Demanganisation system GENO-mat MN-Z
Order no. 095 153 048-inter Edited by: nkes-mrie G:\BA-153048-INTER_095_GENO-MAT_MN-Z.DOCX
22
Caution!
Dirt and corrosion particles might damage the system
(control valve). Flush the supply pipe prior to start-up.
2. Establish waste water connection as per DIN EN 1717. Shorten
the rinsing water hose to the length required and direct it to the
drain. Make sure that there is a free outlet (min. 20 mm) to the
drain. Secure the hose with suitable means to prevent the hose
from moving about (exiting regeneration water is pressurised).
Caution!
Danger of damage and malfunction due to backflow of
waste water. Therefore, do not bend the hose and do not lead it
higher than the system height.
3. Connect the mains plug to the socket (cf. 1.2).
4. Water the system
In order to prevent the filter material from being washed out, it
must be watered for 24 hours.
Control valve
Raw water inlet
Filter tank
Raw water outlet
Drain connection
Fig. D-2 (b): Demanganisation system GENO-mat MN-Z, rear view
