11
Appendix 2
Time setting
Result on screen
Follow these instructions
View current time by turning knob fully
clockwise.
Click knob until « CALIBRATION »
indicator turns on.
Press knob for 5 seconds until CAL
appears on screen.
Let knob go, you now enter the time
setting mode.
Click knob to display current time
You must turn knob to set minutes before
going to step 6.
Click knob and turn to set hours. Click
knob to toggle between hours and minutes.
Press knob for 5 seconds until GOOD
appears on screen.
Let knob go to return to normal operation
.
1.
2.
3.
4.
5.
6
7.
8.
Calibration
Minutes are blinking
Hours are blinking
ALARM AND ERROR MEANINGS
Alarm/
Error #
Description
Displayed on screen
Error 1
CO
2
Sensor problem:
Turn power off and retry. If problem
persists, call you retailer.
« - - - - »
Error 3
Real Time Clock problem :Turn
power off and retry. If problem persists,
call your retailer.
« Er.3 »
Alternately with sensor
values.
Error 8
Memory corruption problem : all set-
tings have been reset to factory settings.
You may need to re-enter your settings.
If problem persists, all your retailer.
« Er.8 »
Alternately with sensor
values.
