GROWSPAN
™
GOTHIC PRO GREENHOUSES AND SYSTEMS
22
113836_37_38_39PC Revision date: 06.06.18
7. Install aluminum u-channel profile to all edges of the
polycarbonate panel.
Photo shows panel installed on door frame and finished
with the aluminum u-channel (104213). Corners are cut
at 45° angles.
To keep panel and profile secure, install the FA4484B
Tek screws and neo-bonded washers so screw drills
through the longer edge of the U-profile (underside of
the panel) and washer overlaps shorter edge of the
U-profile (top) as shown above.
8. Repeat the above steps to attach panel and to install
the aluminum profile to the remaining door frame.
9. After assembling both doors, evenly space two hinges
along each door frame.
10. Attach hinges using the FA4484B Tek screws.
11. With assistance, lift door and attach hinges to end wall
using FA4484B Tek screws.
12. Install 6" chain bolt to upper part of the inside of one
door. Attach main latch assembly to the other door.
Locations of door hinges may vary.
13. At top and sides of end wall door opening on the inside
of the frame, attach end cap (104548) and allow it to
extend below header and into the frame opening.
ATTENTION:
This profile acts as a stop for the double
doors and prevents undo stress on hinges. Consult the
photos that follow.
Inside
View
Outside
View