8
113466_67_68HBC Revision date: 08.27.19
SET GROUND POSTS
Required parts and equipment:
• Ground Posts
• Equipment to level and brace posts
NOTE:
Concrete (customer-supplied) is required to secure all ground post in the holes. Set all posts the same height for proper assembly.
Position all mounting
holes to point toward the inside/outside of frame. Use holes in ground posts to attach post to customer-supplied framing when setting posts.
Consult the services of a qualified contractor if needed to properly set posts. Here are the basic steps:
1. Take one ground post, measure 24" from the end opposite bolt holes, and mark the location on ground post. Repeat to mark all ground posts.
2. With assistance, brace all posts in place. See diagram below. All posts to be plumb before adding concrete. Use mounting holes in posts and customer-
supplied fasteners and stakes to hold posts in place.
3. Add concrete to anchor posts in holes. Fill hole so concrete remains below finished grade.
ATTENTION:
Ground posts include pre-drilled rafter mounting bolt holes and
holes to attach baseboards.
Position holes to point outside/inside the frame.
Set Ground Posts
ATTENTION:
Whether driving posts or anchoring
in concrete, set top of posts at the same height.
Drive or set posts in concrete 24" below finished
grade. Top of post is 12" above grade.
Use customer-supplied materials
to construct braces.
String line showing top
of all ground posts.
Stake Ground Posts for Concrete
Finished Grade
String line showing top
of all ground posts.
NOTE:
Layout above shows how to brace ground
posts when setting posts in concrete.
Outside Frame
Inside Frame
