42' Install Manual 6&11-W1 Snowshed Doorway Installation
Revised: 02/15/2022
Planted Rafters
19
20
21
May come with a bevel angle on each end to match the roof. If not you
can do straight cuts, or double bevel angles if you prefer. Use a level
between the Ridge and Side Rafter Supports and butt Planted Rafters
up against level for placement. Screw through the glazing from the
back (using 1-1/2" ss screws). Screw diagonally into the Ridge and
Side Rafter Supports from the front (using 2-1/2" screws).
Ridge Support
The Ridge Support is sent long and needs to be trimmed in the field. Attach
Ridge Support. Toe-screw two 3" screws at the top into the Ridge and two
3" screws through the Headers at the bottom.
Left and Right Roof Glazing Panels
Trim to fit. Install 32" (with holes) Bottom Cap on bottom
edge. Attach with 3-4" overhang on front and side. Use
1-1/2" ss screws. Tip: mark and trim glazing in step 21,
22 and 24 before fastening to the snowshed structure.
Bottom
cap
9 of 12
