1.1 Preface
1
2
1.2 Target Group
1.3 Additional information
1 Brief Introduction
This manual will provide the users who use the Growatt SPH TL3 BH Series of Shenzhen
Growatt New Energy Technology Co.,LTD(Short for Growatt as below) with the detailed
product information and the installation instructions. Please read this manual carefully
and put this manual on some place where is convenient to installation, operation, obtain.
Any modifications of Growatt new energy, we will not notify the user.
Growatt SPH TL3 BH inverter must be installed by professional electrical personnel who
have obtained the certification of the relevant departments. We have two kinds of
energy storage machine for different battery one is for lithium battery and the other is
for lead-acid battery, we suggest: customer should decide which kind of energy storage
machine you want, Growatt can provide only lithium battery with energy storage
machine, customer can choose lead-acid energy storage machine with no battery provide
by Growatt while they can buy these battery from market easily. Especially if customer
choose energy storage system with lithium battery(which must be provide by Growatt)
but used for lead-acid battery or used lead-acid battery for lithium battery model, it will
be dangerous. Installer can install energy storage machine of Growatt SPH TL3 BH Series
rapidly and troubleshooting, build communication system through read this manual
carefully.If you have any questions in the process of installation, you can login in
www.growatt.com and leave some message.Or you can call our 24-hour service
86 0755 2747 1942.
Growatt SPH TL3 BH Series is used to store energy generated by the photovoltaic cell
panels or energy from grid if it is allowed in the battery, also energy can be sent to power
grid through SPH TL3 BH for self consumption or when Grid power is lost, SPH TL3 BH can
be used as backup power.
SPH series has six kinds of type:
SPH 4000TL3 BH
SPH 5000TL3 BH
SPH 6000TL3 BH
SPH 7000TL3 BH
SPH 8000TL3 BH
SPH 10000TL3 BH
Note: we describe this series as “SPH” as below.
Overview:
Chart 1.1
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
Position
Description
LED of status display
LCD screen
Function button
Ground point
EPS output(off grid connection)
RSD(do not open except by Professional staff)
AC Grid (on grid connection)
Rj45 interface of DRMs(used only in Australia)
NTC: Lead-acid temperature sensor terminal
RS485 communication interface of meter2(Reserved)
RS485 communication interface of Lithium battery
Rs485 communication interface of meter1
CAN communication interface of Lithium battery
RS232/Wi-Fi/shinelink cover board
Antenna
PV switch
PV input
Battery terminal
Breathable valve
USB interface
DIP switch(set safety standard)
Dry contact
