4.2.9 Set Combiner Box Address and Switch
In the "Parameter" interface, "Combiner Box: address start" after the text box to set the start
address, the default value is "41", you don’t need to change it.
In the "address end" after the text box set the end address, the default value is 50, followed by
the check box for the fuse box switch.
Note: There is no corresponding function device, prohibit the opening of this switch, otherwise it
may cause the equipment is not working properly.
Figure 4-18
4.2.10 Inverter Model Selection
In the "Parameter" interface under the "Inverter type" after the drop-down list is now the
inverter model, temporarily only support Growatt inverter.
Figure 4-19
4.2.11 Inverter Fault Indication
There are two ways to indicate the inverter fault:
1. The status LED of the Shine WebBox will turn to red, accompanying with beeping
for 1 min.
2. In the integrated server interface of the Shine WebBox, the data about the
inverters are shown in red.
