21
1.
Communicate with inverter by RS232 and Bluetooth.
2.
Construct net with inverter, GRO monitor and Shine NET by RS232,
Bluetooth and Internet.
3.
Two Interfaces: Multi Inverter Interface and Wave Data Interface.
4.
In Multi Inverter Interface: See at most 4 inverters working data at the same
time, you can select your own compare inverters and parameters.
5.
In Wave Data Interface: Query the inverter real time and history power wave,
work data and error information.
6.
Multi languages: English, French, German, Spanish and etc.
7.
Support OS: WinXP/ Vista/win7/2000/2003.
9.2 Monitor
After setting the software the user can monitoring the inverter. The right side of the
main interface is the detailed information of inverter.
9.3 Detailed information
Detailed setting method and other functions refer to “Shine NET Manual.” in the
CD.
10. TROUBLE SHOOTING
In most situations, the Inverter requires very little service. However, if Inverter is
not able to work perfectly, please refer to the following instructions before calling
your local dealer.
Should any problems arise, the LED on the front panel will be red and the LCD
displays the relevant information. Please refer to the following table for a list of
potential problems and their solutions.
11. SYSTEM FAULT
• Ground
Fault
1. The ground current is too high.
2. Unplug the inputs from the PV generator and check the peripheral AC system.
3. After the cause is cleared, re-plug the PV panel and check PV-Inverter status.
4. If the problem persists please call service.
