background image

6.2 Setting the LCD display

The inverter can support three kinds of knock: single knock, double knock. Each kind

of knock has different function. Refer to specified definition in Table below

Knock type

Definition

Single knock

Double knock

Key Down

Key SET

Before light the background, the types of knock functions are the same: just

light the background.
That the background light will automatically off if there is no knock detected in 10
seconds.

Sound control can define the display language, luminance of the display, and

utility model choice. When the LCD is dark, Knock and double knock make it
becomes bright. Knock to make it display next information or change the set
situation. Double knock make the display stand for 30 second, enter to setting the
menu.

Setting language

Knock to make the display bright

knock to “set language”

double knock to enter

“language: English”

knock to select the language you need and wait until the

display become dark.

Setting luminance of the display

Knock to make the display bright

knock to “set LCD contrast”

double knock to

enter “LCD contrast 2”

knock to select the luminance you need and wait until the

display become dark.

Setting communication address

Knock to make the display bright-->knock to “COM Address: xx” -->double knock to
change the Address model-->clock to set address.

Setting grid model choice

This function is disable when the inverter work in the normal state, you much turn off
the AC separate unit, and the inverter LCD will display a error “NO AC Connection” ,
LED turn red ,then this model choice function is enable.

Knock to make the display bright

knock to “Net Model: xx”

double knock to

enter “Net Model: xx”

knock to select the grid model .need to wait for 10S till the

CPU restart.
Then check the “NET Model” in LCD display again.
Turn on the AC separate unit, inverter begin to work.

Communications

7

Communications

7

7.1 Monitoring Products

7.1.1 Shine Net

Shine NET is a PC software that communicate with inverter to analyze the inverter

working state. It is convenient for you to know the inverter's real-time working state

and the history work information.

Specification:

Communicate with inverter by RS232 and Bluetooth.

Construct net with inverter, GRO monitor and Shine NET by RS232, Bluetooth and

Internet.

Two Interfaces: Multi Inverter Interface and Wave Data Interface.

In Multi Inverter Interface: See at most 4 inverters working data at the same time, you

can select your own compare inverters and parameters.

In Wave Data Interface: Query the inverter real time and history power wave,work

data and error information.

Multi languages: English, French, German, Spanish and etc.

Support OS: WinXP/ Vista/win7/2000/2003.

33

34

Power :     2016.2w

Net

Model: 2

Power :     2016.2w

Net

Model: 3

Power :     2016.2w

Net

Model: 4

Summary of Contents for 1500-US































Reviews: