3
Updated: 5/21/2003
S
AFETY
P
RECAUTIONS
A careful operator is the best operator. Most accidents can be avoided by observing certain
precautions. To help prevent accidents, read and take the following precautions before operating
this equipment. In addition to these precautions, please follow all safety and operational instructions
of your tractor manufacturer.
The Dozer:
1. The 4100 Dozer should be operated only by those who are responsible and instructed to do so.
2. Read the owner’s manual carefully before using this equipment. Lack of operating knowledge
can lead to accidents.
3. Keep the dozer maintained in reliable and satisfactory condition to ensure your safety.
4. Make sure the area is clear of people before moving any equipment.
5. Do not modify or permit anyone else to modify or alter the dozer and its components without
first consulting Grouser Products.
Servicing the Dozer:
1. Read and follow all safety instructions provided by the tractor manufacturer.
2. Always use proper personal safety gear when performing maintenance on equipment.
3. Before servicing, relieve hydraulic pressure, stop engine and fully engage parking brake.
4. Escaping hydraulic fluid under pressure can penetrate skin causing serious injury. If fluid is in-
jected into skin, obtain medical attention immediately.
- DO NOT use your hand to check for leaks. Use a piece of cardboard or paper to search for
leaks.
- Stop the engine and relieve pressure before connecting or disconnecting lines.
- Tighten all connections before starting the engine or pressurizing lines.
Storing the Dozer:
1. Thoroughly clean the dozer before storage. Use paint where necessary to prevent rust.
2. Check the dozer for worn or damaged parts. Install new parts as required.
3. Lubricate all pins and joints.
Summary of Contents for 4100
