- 5 -
Power input & speaker output connections
1
POWER INPUT
+12V
Positive terminal (battery)
GND
Ground terminal
REM
Remote input (in RCA mode) or Remote output (in high-level mode)
Never connect the remote output wire of a source unit in high-level mode to the remote terminal!
In high-level mode, the switched voltage at the terminal can be used to turn on additional
amplifiers. The current of the remote terminal is limited to 130 mA. In case of using several units
with a common current exceeding the limitation, an additional relay is required.
2
FUSE
Defective fuses must be replaced by fuses with identical values
3
Status indicator
POWER
green/ok (regular operation mode)
PROTECT red/error (protection mode)
4
SPEAKER OUTPUT
Channel A/B/C/D speaker terminal
High-level input harness
ATTENTION!
Please note that the GZDSP 4.80AMP cannot be used in vehicles with a factory active system installed. That might lead
to serious defects of the amplifier as well as of the vehicle´s electronic system. In case of uncertainty contact your car
audio dealer or the car´s manufacturer.
