![background image](http://html1.mh-extra.com/html/grone-0/gag-22-230-ht/gag-22-230-ht_operating-instructions-manual_2269675023.webp)
23
Mounting the Guard
Guards suitable for a particular type of wheels must be used for safety reasons.
Wheel guard is mounted to the body of the power tool using fl ange screwed with a Phillips screw.
Hex screw is used in GAG 22-230 HT and there is a suitable hex key wrench (10) included in the power
tool equipment.
1.
Fit the guard onto the drive spindle collar so that the three holes on the metal plate and on the
power tool are in alignment.
2.
Turn the guard to the requested position until the clamp lever is locked, Adjust the guard in
such a manner that sparking is prevented in the direction of the operator.
3.
Tighten the three screws using a crosshead screwdriver or hex key wrench (10) for GAG 22-
230. Mounted guard should not rotate.
Szlifierki_katowe_Full_v04_HR.indd 23
Szlifierki_katowe_Full_v04_HR.indd 23
2016-10-26 00:19:29
2016-10-26 00:19:29