manualshive.com logo in svg

Gröne 2536-840600, Operating Instructions Manual

Share
Download
Gröne 2536-840600 Operating Instructions Manual Download Page 24

24

ENVIRONMENT PROTECTION:

Dust emitted during grinding may include harmful substances - dispose properly. National laws and 
regulations on the disposal and recycling of used tools, packaging and accessories should be adhered 
to.

Only for EU countries: do not dispose of power tools into household waste! According the European 
Guideline 2002/96/EC for Waste Electrical and Electronic Equipment and its implementation into na-
tional right, power tools that are no longer usable must be collected separately and disposed of in an 
environmentally correct manner

DISCLAIMER:

KAEM Sp. z o.o. Sp. K. shall not be liable for any damage or fi nancial losses caused by the interruption 
of business operation due to our product or no possibility of using it.

KAEM Sp. z o.o. Sp. K., as well as its representatives, shall not be liable for damage caused by improper 
use of the power tool or as a result of using it together with products of other manufacturers.

Pily_stolowe_GTTS_Full_v04_HR.indd   24

Pily_stolowe_GTTS_Full_v04_HR.indd   24

2016-10-19   03:21:03

2016-10-19   03:21:03

Summary of Contents for 2536-840600







































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands