8
Installation
7.Fix the backplate (A) with the fillet (A1)
down to the wall with screws (D), see
Fig. [5].
8.Slide the valve body with elbows and com-
pression nuts loosely over the supply
pipes, see Fig. [6].
The body must touch the backplate. If
not, check pipes for length again.
9.Fix the valve body (B) to the backplate
with clips (E) and screws (F).
Do not
use excessive force to tighten the
screws (E).
10. Tighten the compression nuts (torque
min. 20 Nm), see Fig. [7].
11. Slide the chassis (G) with the interme-
diate handle (H) over the driver (J) and
tighten to body with screws (G1), see
Fig. [8].
Additionally seal the top edge of the chas-
sis with silicone if it is fitted against a par-
ticularly rough surface (deep tile joints,
highly textured tile).
5
A
D
A1
6
B
E
F
7
8
G
G1
J
B
H
Summary of Contents for Grohsafe 35 237
Page 3: ...II Spare Parts 3 4 Spare Parts Spare Parts...
Page 13: ...14...
