BreakAlube-3
F600775R00
6
General information
Automatic Greasing System
Release date: September 2014
2.2
The BreakAlube-3 automatic greasing system
The BreakAlube-3 pump is designed for use on excavators equipped with a hydraulic ham-
mer. The pump is installed on the excavator and the grease is delivered to the hydraulic ham-
mer by means of a hydraulic high pressure hose. The pump is activated by switching on the
hydraulic hammer and pumps a quantity of grease to the hydraulic hammer, either at brief
intervals or continuously, depending on the settings.
A Groeneveld automatic greasing system consists of the following components:
1. An electric plunger pump with integral grease reservoir and control unit with database.
2. Grease line between pump and quick coupler.
3. Quick coupler.
4. Grease hose between quick coupler and hydraulic hammer.
5. Electrical wiring harness.
6. Signal lamp.
