OM-HY/6E 5
Your Groen HY-6E HyPerSteam Convection Steamer is designed to give years of
service. It has two stainless steel cavities (cooking chambers) which are served by
twin, independent atmospheric steam generators which are electrically heated. A
powerful blower circulates the steam in each cavity to increase heating efficiency.
Each cavity holds up to three steam table pans (12” x 20” x 2½”). An 18 gauge
stainless steel case encloses the cavities, the steam generators and the control
compartment that houses electrical components. Door hinges are reversible (the doors
may be set to open from the left or right). Operating Controls are on the front panel.
HY-6E steamers are equipped with fully electronic controls and a button-activated,
preprogrammed CLEAN cycle. The On-Off switch is a touch pad control, and the
distinctive symbol for steam is integrated into the panel design.
The drain system includes a spray condenser, which helps keep steam from escaping
down the condensate drain.
Equipment Description
The HY-6E has two independent cavities, each
with its own base-mounted steam generator.
Inspection & Unpacking
The HY-6E will be delivered completely assembled in a heavy crate attached to a skid.
On receipt, inspect the crate carefully for exterior damage.
Carefully cut the straps around the crate and detach the crate from the skid. Be careful
to avoid personal injury or equipment damage from staples which might be left in the
crating.
Write down the model number, serial number and installation date. Keep this information
for reference. Space for these entries is provided at the top of the Service Log in the
back of this manual.
When starting installation, lift the unit straight up off the skid. Check packing materials
to make sure loose parts such as the condensate drip tray are not discarded with the
packing material.
CAUTION
SHIPPING STRAPS ARE UNDER TENSION
AND CAN SNAP BACK WHEN CUT.
CAUTION
THIS UNIT WEIGHS 550 POUNDS. GET HELP
AS NEEDED AND USE MATERIAL HANDLING
EQUIPMENT TO MOVE IT.
