Groen GSSP-BL-10G, Service Manual

Page: 62 / 65

62 SM-GSSP BOILERLESS STEAMER
SHUTDOWN
Shutdown
Image 1
Shutdown in process,
please wait
Time for a break?
You deserve it!
I'll see you
tomorrow.
Shutdown
Image 2
Shutdown in process,
please wait
Great cooking
today! We make
an awesome
team.
SHUTDOWN
Shutdown screen will appear when power switch is turned off and power
switch will darken. Progress bar will fill with white color from left to right
during shutdown. Progress steps will be: Low probe transition - break, Low
probe transition - make, High probe transition - make, High probe transition -
break, Low probe - make, Low probe transition - break, High probe transition
- make, High probe transition - break, Low probe - make After the Low probe
- make, screen goes blank. During shutdown, text will appear and disappear
in sequence. Text images will fade out and new image will appear (no fade in)
every 4 seconds. Menu is not available during shutdown. Muffin fans stays on
until screen is blank. Convection fan and heating contactor goes off as soon as
Shutdown begins. Condensate spray stays on until Ready tstat is closed. Power
cycling during Shutdown will cause unit to drain to Low probe and begin Startup
procedure. If front ON/OFF button is pressed or an error caused shut down
occurs and both probes are functioning, then unit will fill to the High probe; drain
to Low probe past for XX minutes and refill to the High probe then drain cavity to
empty. If front ON/OFF button is pressed or shutdown counter expires and High
probe is functioning and Low probe is not functioning, then unit will drain for XX
minutes; then fill to High probe and drain for XX minutes then fill to High probe
and drain cavity to empty. If front ON/OFF button is pressed or shutdown counter
expires and Low probe is functioning and High probe is not functioning, then unit
will drain off Low Probe X seconds or minutes; then fill past Low probe for XX
minutes and drain cavity to empty. If an error shutdown occurs and the Low and
High Probe is not functioning; then unit will attempt to fill for XX minutes then
drain cavity to empty. All active audible alarms are disabled when ON/OFF button
is pressed to turn off unit. Once power button is pressed or shutdown process is
initiated to turn unit off, the power button will be disabled to turn the unit back
on until the shutdown process is complete.
Service Mode
Entering
Service Mode
Restart
12:00pm
Startup Date
Unit Status
Diagnostics
Error Log
V 1.1
Firmware
Update
Data Retrieval
Documents
RTD Calibration
Parameters
Service
Restart Unit?
Restart
Cancel
Unit needs to restart
prior to resuming normal
operation.
RESTART
Pop up occurs after exiting the Service screen after engaging Diagnostics.
Restart - Unit shuts down and restarts.
Cancel - Unit returns to Diagnostics.