Model T32537 (Mfd. Since 01/21)
-11-
13. Install (1) 72" main V-rail (see Figure 11) on outer edge of work surface using (2)
#10 x
3
⁄
4
"
wood
screws—one for each mounting end cap installed in
Step 12.
14. Cut two pieces of scrap wood the width of slab plus 7", and use these as gauge blocks to position
second V-rail parallel to the first (see
Figure 11). When satisfied with positioning, secure second V-rail
with (2)
#10 x
3
⁄
4
"
wood screws and mounting end caps.
Note: To simply set up the 72" V-rails for maximum width, use 45" gauge blocks.
15. Attach (2) handles to (2) short guide blocks
with (2)
1
⁄
4
" nylon flat washers and (2)
1
⁄
4
"-20
x 1
1
⁄
2
" hex bolts (see
Figure 12).
16. Attach each handle assembly to (1) router
plate hanger (see
Figure 13) with (2)
1
⁄
4
"-20
x
5
⁄
8
" button head cap screws and (2)
1
⁄
4
"-20
lock nuts. Slide lock nuts into track on face of
short guide blocks and tighten screws.
Figure 11. 72" main V-rails installed on work surface.
x4
Mounting
End Cap
Figure 12. Handle installed on short guide block.
Handle
Short
Guide Block
x2
Figure 13. Handle assembly attached to router
plate hanger.
Handle
Assembly
Router Plate
Hanger
x2
